Embroidery stabilizer

Pellon Fuse-N-Tear Embroidery Stabilizer
The image shows a roll of Pellon Fuse-N-Tear (Style 371), which is an iron-on, tear-away embroidery stabilizer used to provide temporary support for machine embroidery, appliques, and decorative stitching.
Key Features & Specs
Type: Fusible (iron-on) and tear-away.
Size: 12 inches by 12 yards (30.5 cm x 11 m).
Primary Use: Best for woven fabrics, appliques, monogramming, and decorative stitch work.
Removal: Tears away cleanly and easily once stitching is complete.
Step-by-Step Usage Instructions
Pre-test: Always test an off-cut on a fabric scrap first to check the iron temperature and adhesion.
Placement: Place the rough, shiny side (the adhesive side) against the wrong (back) side of your fabric.
Fusing:
Set your iron to a Low/Medium or Silk/Wool setting (no steam).
Press firmly and hold the iron in place for 2 to 3 seconds.
Glide the iron across the area until the entire piece is lightly bonded.
Stitching: Hoop your fabric with the stabilizer attached and proceed with your embroidery or decorative stitching.
Removal: Carefully tear away the excess stabilizer outside of the stitched design. Hold the stitches with one hand while tearing